Tubo d'acciaio speciale

Product Name:TORICH GB/T20409 20G 20MnG 25MnG SA210 SA213 Multi-rifled High-pressure Boiler Seamless Steel Tubes Standard: GB/T20409 OD: 3-420mm WT: 0.5-50mm Length: 8-12m or according to customers' actual application and production. Application:High-pressure Boiler Steel Grade:20G 20MnG 25MnG SA210 SA213 Technology:Hot rolled,cold rolled,cold drawn Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable quality Smooth Roughness

Products Description: For Structural Purposes GB/T 18704 Welded Stainless Clad Pipes Steel Grade/Steel Material: Steel Grade Chemical composition % C Si Mn P S Ni Cr N 12Cr17Mn6Ni5N ≤0.15 ≤1.00 5.50-7.50 ≤0.050 ≤0.030 3.50-5.50 16.00-18.00 0.05-0.25 12Cr18Mn0Ni5N ≤0.15 ≤1.00 7.50-10.0 ≤0.050 ≤0.030 4.00-6.00 17.00-19.00 0.05-0.25 12Cr18Ni9 ≤0.15 ≤1.00 ≤2.00 ≤0.045 ≤0.030 8.00-10.00 17.00-19.00 ≤0.10 06Cr19Ni10 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.030 8.00-11.00 18.00-20.00 -

Steel Grade: 10#/ 20#/ 35#/ 45#/ Q195/ Q215/ Q235/ Q295/ Q345/ Q390 Application: Used in structural parts, tool and machinery parts Production method: Cold drawn Tube Type: Seamless tube according to the Chinese standard GB/T 3094, or welded tube according to customers' request Tolerance: According to the following tables, or according to customers’ request. Tolerance for the width Size(mm) Tolerance(mm) General High Grade Width A / B ≤30 ±0.30 ±0.20 >30-50 ±0.40 ±0.30 >50-75

DIN EN 10130:2007-02 Cold rolled low carbon steel flat products for cold forming – Technical delivery conditions This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does

GB/T3094-1986 Seamless Cold Drawn Special Shape Steel Pipe

Hexagonal Special Steel Pipe 50mm Seamless Stainless Steel Tubing Stainless Seamless Hexagonal Steel Tube, it is made by Stainless Steel, produced by cold drawn, both inside and outside are Hexagonal Shape Sizes: According to Customers' Drawing and Design.

Painted Rifle Seamless Carbon Steel Pipe With Fin On Two Sides Seamless Rifle Steel Tube, it is made by Carbon and Alloy Steel, produced by cold drawn, Rifle Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement.

Galvanized Special Steel Pipe Cold Drawn Steel Pipes OD 5-420mm Torich is professional manufacturer and exporter of Special Shape Seamless Shape Steel Tubes for Boilers, which are widely used in Boilers, Super Heat Exchangers etc. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement. Outer

Non Alloy Seamless Special Steel Pipe Omega Tube Material 20G For Boilers Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or